---
title: How to Replace Your Filters
description: "### Set Up Video [How to Replace Your CP-16 Filters](https://www.youtube.com/embed/FNDPMUACA_Q?feature=oembed&enablejsapi=1&origin=https://old.covepure.com) ### **Install the Filters** **STEP 1:** Unplug the system. **STEP 2:** Remove the tank lid, and slide the filter lid off. **STEP 3:**  Twist the old filter *counter-clockwise* until the arrow…"
url: "https://old.covepure.com/faq/how-to-replace-your-filters/"
updated: "2025-04-17"
category: How to Replace Your Filters
---

# How to Replace Your Filters

### Set Up Video

[How to Replace Your CP-16 Filters](https://www.youtube.com/embed/FNDPMUACA_Q?feature=oembed&enablejsapi=1&origin=https://old.covepure.com)

### **Install the Filters**

**STEP 1:** Unplug the system.

**STEP 2:** Remove the tank lid, and slide the filter lid off.

**STEP 3:**  Twist the old filter *counter-clockwise* until the arrow on the handle points to the word “**Open**”. Then, remove.

**STEP 4:** Remove the plastic wrapping and bottom cap from your new filter, then place the new filter into the slot with the arrow pointing to the word “**Open**”.

**STEP 5:** *Push down* and *twist clock-wise* to lock. Make sure the arrow on the handle points to the word “**Close**”.

**STEP 6:** Put lids back on the filter slot and tank. Then, plug the system in.

### **Reset Filter Life**

**STEP 1:** Allow the machine to flush your new filters. Wait for "FLSH" to disappear off-screen (roughly 2 minutes).

**STEP 2:**Press and hold the “CUSTOM” and “16oz” buttons at the same time for **5 seconds**until you see “PCB” flash on the screen.

*If you are replacing your PCB filter, move on to the next step.*
 *If you are replacing your RO filter, press "CUSTOM" again until you see "RO" flash on-screen.*

**STEP 3:** Press and hold the “CUSTOM” and “16oz” buttons again for **5 seconds**, to save your selection.

The bars on your filter life will now be full again!

### **Rinse Filters**

Before drinking water from your new filter, please run your system through three full cleansing cycles. This will ensure that your water tastes great!

**STEP 1:** Place a large bowl under the dispenser nozzle

**STEP 2:** Wait for the pitcher to fill up, then press and hold the dispense icon for **5 seconds**.

**STEP 3:** Allow the pitcher to fully empty itself, then repeat STEP 2 **two more times**, refilling the back water tank as needed.

Now you're done! Enjoy clean, great-tasting water again.
